Posts tagged “fpga”

12 posts.

Project: How Do You Build an AXI4-Lite Peripheral?

A custom AXI4-Lite peripheral in Verilog with four registers, tested against 300 random transfers, and synthesized for a Zynq-7020 at 100 MHz.

14 min read

How Does AXI4-Lite Work? Channels, Handshakes, Timing

AXI moves data on five channels, each with a VALID and READY handshake. How AXI4-Lite writes and reads work, cycle by cycle, from a simulated peripheral.

11 min read

How Does an FPGA Work? LUTs, Flip-Flops and Routing

An FPGA is a grid of lookup tables, flip-flops, block RAM and DSP slices joined by programmable routing. What each does, with real numbers for an Artix-7.

9 min read

FPGA Constraints and Timing Closure: XDC, WNS and Fixes

Constraints tell Vivado the pins and the clock; timing analysis checks every path against it. Reading WNS, and the fixes when a path fails, from real reports.

10 min read

FPGA Project: Blink an LED on Basys 3, Arty A7 or DE10-Lite

The first FPGA project: a counter divides the board clock down to toggle an LED once a second. Verilog, constraints for three boards, and the Vivado results.

8 min read

FPGA Project: A Seven-Segment Seconds Counter

A four-digit BCD seconds counter on the Basys 3 and DE10-Lite displays: a carry chain, a segment decoder, and multiplexing four digits on one bus.

10 min read

FPGA Project: A UART Echo at 115200 Baud

Type on your computer and the FPGA sends every character back: the UART project's receiver and transmitter, a one-byte holding register, and three boards.

9 min read

FPGA Project: VGA Color Bars at 640 x 480

Generate 640 x 480 VGA timing and eight color bars on a Basys 3 or DE10-Lite: horizontal and vertical counters, sync pulses, and a 25 MHz pixel enable.

10 min read

MicroBlaze vs Zynq: Soft or Hard Processor on an FPGA?

MicroBlaze is a processor built from FPGA logic; Zynq has Arm cores in silicon beside the fabric. How they differ in speed, resources, cost and software.

9 min read

How Do SoC Interconnects and Memory Maps Work?

An interconnect routes each transfer to a slave by its address, using the memory map. Address decoding worked through, with arbitration and bridges to APB.

9 min read

What Does Vivado Do? Synthesis to Bitstream, Step by Step

Vivado turns Verilog and constraints into a bitstream: synthesis, optimization, placement, routing, timing and utilization reports, then the bitstream.

9 min read

What Is an SoC? The Parts of a System on Chip

A system on chip puts processors, memory, peripherals and accelerators on one die, joined by an on-chip interconnect. The parts, and why they share one chip.

8 min read